Non permanent Floor Protection – A Product Guide

Your floors need special protection when undergoing remodeling, throughout new building, moving heavy furniture or equipment, and for different events beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can value hundreds of dollars in replacement and repair costs. This article describes surface protection products for floors to be able to make informed decisions on the perfect product to make use of in your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These include frequent adhesive films, rolled paper products and rolled textile protection. Protective materials bought by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to forty eight mils thick).

(2) Products by the sheet: These embrace corrugated plastic, masonite, and different rigid protection. Protective materials bought by the sheet are commonly measured in thickness by the inch (e.g., 1/4-inch thick) and usually come as 4 toes by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces however does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to secure them to flooring and tapes can usually go away adhesive residue when removed. Common paper protection products embody:

· Ramboard™ A coated compressed paper board 38 mils thick that is breathable, water-proof and made from recycled paper.

· Kraft paper is a lightweight brown paper that’s inexpensive however does not afford any impact protection and may easily tear

· Scrim paper could incorporate coatings or reinforcements to make them water resistant as well as scrim threads to reinforce the paper and forestall tearing. These improved papers are longer lasting than common Kraft paper or rosin paper however they’re additionally too thin to supply a lot impact protection.

· Rosin paper is thicker than Kraft paper and is very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The massive drawback of utilizing Rosin paper is that it may cause a everlasting stain if the paper gets wet. Rosin paper can even rip easily so it not normally really useful for use

· Corrugated cardboard rolls or sheets can be used to protect flooring. Corrugate provides impact protection nevertheless it is just not coated with a water-resistant finish and should be kept dry at all times in order that it doesn’t disintegrate. Cardboard products are additionally available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films various from 2.zero up to 3.5 mils in thickness. They trap any moisture from escaping so that they shouldn’t be used on any floors that are curing. Two of the good benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films do not provide any impact protection and are usually rated for brief term use of 30 to ninety days only. Polyethylene films are designed for one-time use and do not use recycled materials making them a poor choice in maintainable protection. Protection films are available in a variety of adhesion “tack”. Hard surface protection films can have a lower tack and color than carpet protection which wants a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with a number of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an precise sheet of thin wood. Each plywood and Masonite are sold in the usual size of 4 feet by eight toes and are more costly per sq. foot than paper or polyethylene products. Masonite is commonly 1/8 or 1/4 inch thick. Plywood is commonly 1/4 inch to three/four inch thick. Both products provide impact protection on quite a lot of floor types and provide adequate protection against heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable nevertheless they’re bulky to hold and store. These wood sheets needs to be used on high of a softer protection resembling a rolled textile as they simply scratch flooring. These sheets work well to protect carpet as they forestall wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not provide moisture protection and may be harder to cut to size than different protection types.

In the event you cherished this informative article along with you desire to be given guidance regarding correx floor protection generously visit our own web site.